120H1046 Предыдущий 120H1046
Danfoss

120H1047

По запросу
SKU
r_danfoss_120H1047
WSH161-4
   Цены со скидкой действуют при заказе от 7000 руб
   Минимальная сумма заказа составляет 4000 руб

Characteristic

Value

Type WSH
Net weight 59.00 Kg
Approval standards CE certified; UL certified (file SA6873)
Brand technique Scroll compressor
Configuration code Single
Connection type Brazed
Discharge connection pipe size [in] 7/8
Discharge connection size [in] 7/8
Drawing number 8560003d
Factory HP [bar] 0
Factory LP [bar] 0
Fitting standard ODF
Frequency [Hz] 50/60
Gauge port HP None
Gauge port LP Schrader
Generation code C
Glass mounting Threaded
Glass torque [Nm] 50
Gross weight 59.00 Kg
High value of nominal voltage at 50Hz [V] 415
High value of nominal voltage at 60Hz [V] 460
High value of voltage range at 50Hz [V] 457
High value of voltage range at 60Hz [V] 506
IP protection class IP54 (with cable gland)
LRA 158 A
Low value of nominal voltage at 50Hz [V] 380
Low value of nominal voltage at 60Hz [V] 460
Low value of voltage range at 50Hz [V] 342
Low value of voltage range at 60Hz [V] 414
MCC 33 A
Model number WSH161A4ALC
Motor protection Internal overload protector
Mounting torque [Nm] 15
Nominal cooling capacity at 50Hz 34.6
Nominal cooling capacity at 60Hz 47.1
Nominal heating capacity at 50Hz 34.5
Number of starts per hour [Max] 12
Oil charge [cm3] 3.3
Oil equalization 1-3/4'' Rotolock
Oil reference 160SZ
Packaging height [mm] 750
Packaging length [mm] 1150
Packaging weight [Kg] 582
Packaging width [mm] 950
Packing format Industrial pack
Packing quantity 8
Phase 3
Power connections Screw 4.8 mm
RLA 23.6 A
Refrigerant R410A
Refrigerant charge [kg] [Max] 7.9
Relief valve None
Rotational speed at 50Hz [rpm] 2900
Rotational speed at 60Hz [rpm] 3500
Shipped instructions Installation instructions
Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers
Shipped oil Initial oil charge
Speed Platform Fixed-speed
Suction connection pipe size [in] 1 3/8
Suction connection size [in] 1 3/8
Swept volume [cm3] 151.7
Technique Scroll
Test HP [bar] [Max] 45
Test LP [bar] [Max] 33
Test dif [bar] [Max] 37
Torque earth [Nm] 2
Torque power [Nm] 3
Type designation Compressor
Viscosity [cP] 32
Winding resistance for three-phase compressors with identical windings [Ohm] 0.83 Ohm
• Acoustic hood 1 120Z0035
• Acoustic hood 1 Description Acoustic hood for scroll compressor SH105-161 and SM124, SM147
• Belt 01 120Z0388
• Belt 01 Description Surface sump heater, 80 W, 24 V, CE mark, UL
• Belt 02 120Z0389
• Belt 02 Description Surface sump heater, 80 W, 230 V, CE mark, UL
• Belt 03 120Z0390
• Belt 03 Description Surface sump heater, 80 W, 400 V, CE mark, UL
• Belt 04 120Z0391
• Belt 04 Description Surface sump heater, 80 W, 460 V, CE mark, UL
• Discharge gasket 8156132
• Discharge gasket Description Gasket, 1-3/4"
• Discharge temperature protection 7750009
• Discharge temperature protection Description Discharge thermostat kit
• Discharge valve 8168030
• Discharge valve Description Rotolock valve, V05 (1-1/4" rotolock, 7/8" ODF)
• Ebox cover 8156135
• Ebox cover Description Service kit for terminal box 96 x 115 mm, including 1 cover, 1 clamp
• Gasket set 8156013
• Gasket set Description Gasket set, 1-1/4", 1-3/4", 2-1/4", OSG gaskets black and white
• Mounting kit 1 120Z0066
• Mounting kit 1 Description Mounting kit for one-scroll compressor, including 4 grommets, 4 sleeves, 4 bolts, 4 washers
• Oil 1 7754023
• Oil 1 Description POE lubricant, 160SZ, 1-litre can
• Oil equalization connection 8156132
• Oil equalization connection Description Gasket, 1-3/4"
• Oil sight glass 8156019
• Oil sight glass Description Oil sight glass with gaskets (black and white)
• Oil sight glass gasket 8156129
• Oil sight glass gasket Description Gasket for oil sight glass (white teflon)
• Solder sleeve set 120Z0405
• Solder sleeve set Description Solder sleeve adaptor set (1-3/4" rotolock, 1-3/8" ODF), (1-1/4" rotolock, 7/8" ODF)
• Suction gasket 8156132
• Suction gasket Description Gasket, 1-3/4"
• Suction sleeve 8153003
• Suction sleeve Description Solder sleeve, P10 (1-3/4" rotolock, 1-3/8" ODF)
• Suction valve 8168022
• Suction valve Description Rotolock valve, V10 (1-3/4" rotolock, 1-3/8" ODF)
• T block 8173230
• T block Description T block connector 52 x 57 mm
• Valve set 7703392
• Valve set Description Valve set, V10 (1-3/4"~1-3/8"), V05 (1-1/4"~7/8")
Напишите ваш собственный отзыв
Написать отзыв120H1047