120H1062 Предыдущий 120H1062
Danfoss

120H1063

По запросу
SKU
r_danfoss_120H1063
SH485-4A
   Цены со скидкой действуют при заказе от 7000 руб
   Минимальная сумма заказа составляет 4000 руб

Characteristic

Value

Type SH
Net weight 0.01 Kg
Approval standards CE certified; UL certified (file SA6873)
Brand technique Scroll compressor
Configuration code Single
Connection type Brazed
Discharge connection pipe size [in] 1 3/8
Discharge connection size [in] 1 3/8
Drawing number 8556133a
Factory HP [bar] 0
Factory LP [bar] 0
Fitting sleeve ODF
Fitting standard ODF
Frequency [Hz] 50/60
Gauge port HP None
Gauge port LP Schrader
Generation code A
Glass mounting Threaded
Glass torque [Nm] 50
Gross weight 0.01 Kg
High value of nominal voltage at 50Hz [V] 415
High value of nominal voltage at 60Hz [V] 460
High value of voltage range at 50Hz [V] 457
High value of voltage range at 60Hz [V] 506
IP protection class IP54 (with cable gland)
LRA 413 A
Low value of nominal voltage at 50Hz [V] 380
Low value of nominal voltage at 60Hz [V] 460
Low value of voltage range at 50Hz [V] 340
Low value of voltage range at 60Hz [V] 414
MCC 90 A
Model number SH485A4AAA
Motor protection Electronic protection module, 24 V ac
Mounting torque [Nm] 21
Nominal cooling capacity at 50Hz 116.1
Nominal cooling capacity at 60Hz 140.5
Number of starts per hour [Max] 12
Oil charge [cm3] 6.7
Oil drain 1/4'' flare
Oil equalization 2-1/4'' Rotolock
Oil reference 160SZ
Packaging height [mm] 800
Packaging length [mm] 1150
Packaging weight [Kg] 737
Packaging width [mm] 965
Packing format Industrial pack
Packing quantity 4
Phase 3
Power connections Screw 4.8 mm
RLA 72.9 A
Refrigerant R410A
Refrigerant charge [kg] [Max] 17
Relief valve Yes
Reverse rotation protection Electronic module
Rotational speed at 50Hz [rpm] 2900
Rotational speed at 60Hz [rpm] 3500
Shipped instructions Installation instructions
Shipped module Electronic protection module mounted in terminal box
Shipped mounting Mounting kit with rigid grommets, bolts, nuts, sleeves and washers
Shipped oil Initial oil charge
Speed Platform Fixed-speed
Suction connection pipe size [in] 1 5/8
Suction connection size [in] 1 5/8
Swept volume [cm3] 442.6
Technique Scroll
Test HP [bar] [Max] 45
Test LP [bar] [Max] 30
Test dif [bar] [Max] 37
Torque earth [Nm] 2
Torque power [Nm] 3
Type designation Compressor
Viscosity [cP] 32
Winding resistance for three-phase compressors with identical windings [Ohm] 0.231 Ohm
• Acoustic hood 1 120Z0022
• Acoustic hood 1 Description Acoustic hood for scroll compressor
• Acoustic hood 2 120Z0353
• Acoustic hood 2 Description Acoustic bottom insulation for scroll compressor
• Belt 01 120Z0360
• Belt 01 Description Surface sump heater + bottom insulation, 56 W, 24 V, CE mark, UL
• Belt 02 120Z0376
• Belt 02 Description Surface sump heater + bottom insulation, 56 W, 230 V, CE mark, UL
• Belt 03 120Z0377
• Belt 03 Description Surface sump heater + bottom insulation, 56 W, 400 V, CE mark, UL
• Belt 04 120Z0378
• Belt 04 Description Surface sump heater + bottom insulation, 56 W, 460 V, CE mark, UL
• Discharge gasket 8156132
• Discharge gasket Description Gasket, 1-3/4"
• Discharge sleeve 8153003
• Discharge sleeve Description Solder sleeve, P10 (1-3/4" rotolock, 1-3/8" ODF)
• Discharge valve 8168022
• Discharge valve 2 120Z0431
• Discharge valve 2 Description Rotolock adaptor (1-3/4” rotolock, 1-3/8” ODF)
• Discharge valve Description Rotolock valve, V10 (1-3/4" rotolock, 1-3/8" ODF)
• Ebox 120Z0458
• Ebox Description Terminal box 210 x 190, including cover
• Electronic protection module 8169015
• Electronic protection module Description Electronic motor protection module, 24 V ac
• Gasket set 8156013
• Gasket set Description Gasket set, 1-1/4", 1-3/4", 2-1/4", OSG gaskets black and white
• Mounting 120Z0495
• Mounting Description Mounting for one-scroll compressor including four-triangle rigid spacer, 4 sleeves, 4 bolts, 4 washers
• Mounting kit 1 7777045
• Mounting kit 1 Description Mounting kit for one-scroll compressor including 4 hexagon rigid grommets, 4 sleeves, 4 bolts, 4 washers
• Oil 1 7754023
• Oil 1 Description POE lubricant, 160SZ, 1-litre can
• Oil sight glass 8156019
• Oil sight glass Description Oil sight glass with gaskets (black and white)
• Oil sight glass gasket 8156129
• Oil sight glass gasket Description Gasket for oil sight glass (white teflon)
• Solder sleeve set 120Z0504
• Solder sleeve set Description Solder sleeve adaptor set, (2-1/4" rotolock, 1-5/8" ODF), (1-3/4" rotolock, 1-3/8” ODF)
• Starting device 4 8156138
• Starting device 4 Description Mounting kit for one-scroll compressor, including 4 grommets, 4 sleeves, 4 bolts, 4 washers
• Suction gasket 8156133
• Suction gasket Description Gasket, 2-1/4"
• Suction sleeve 8153006
• Suction sleeve Description Solder sleeve, P03 (2-1/4" rotolock, 1-5/8" ODF)
• Suction valve 8168026
• Suction valve 2 120Z0432
• Suction valve 2 Description Rotolock adaptor (2-1/4” rotolock, 1-5/8” ODF)
• Suction valve Description Rotolock valve, V03 (2-1/4" rotolock, 1-5/8" ODF)
• T block 8173331
• T block Description T block connector 80 x 80 mm
• Valve set 120Z0547
• Valve set Description Valve set, V03 (2-1/4"~1-5/8"), V10 (1-3/4"~1-3/8")
Напишите ваш собственный отзыв
Написать отзыв120H1063