Товар добавлен в корзину
120U0408 Следующий
120U0961 HRP038T5LP6 COMPRESSOR, M-PAK, MTG Предыдущий
120U0411 HCP120T4LC8 Компрессор спиральный Danfoss
По запросу
SKU
r_danfoss_120U0411
HCP120T4
Цены со скидкой действуют при заказе от 7000 руб
Минимальная сумма заказа составляет 4000 руб
Characteristic |
Value |
| Type | HCP |
| Net weight | 44.83 Kg |
| Approval standards | CE certified; UL certified (file SA11565) |
| Brand technique | Scroll compressor |
| Configuration code | Single |
| Connection type | Brazed |
| Discharge connection pipe size [in] | 7/8 |
| Discharge connection size [in] | 7/8 |
| Drawing number | 0SR4103B-2 |
| EAN | 5702428212458 |
| Fitting standard | ODF |
| Frequency [Hz] | 50/60 |
| Gauge port HP | None |
| Gauge port LP | None |
| Glass mounting | None |
| Gross weight | 48.83 Kg |
| High value of nominal voltage at 50Hz [V] | 415 |
| High value of nominal voltage at 60Hz [V] | 460 |
| High value of voltage range at 50Hz [V] | 457 |
| High value of voltage range at 60Hz [V] | 506 |
| IP protection class | IP22 |
| LRA | 140 A |
| Low value of nominal voltage at 50Hz [V] | 380 |
| Low value of nominal voltage at 60Hz [V] | 460 |
| Low value of voltage range at 50Hz [V] | 342 |
| Low value of voltage range at 60Hz [V] | 414 |
| MCC | 25 A |
| Model number | HCP120T4LC8 |
| Motor protection | Internal overload protector |
| Nominal cooling capacity at 50Hz | 25.2 |
| Nominal heating capacity at 50Hz | 16.1 |
| Oil charge [cm3] | 2.66 |
| Oil equalization | None |
| Packing format | Single pack |
| Packing quantity | 1 |
| Phase | 3 |
| Power connections | Screw connectors 10-32 UNF x 9.5 |
| RLA | 19.2 A |
| Refrigerant | R407C |
| Refrigerant charge [kg] [Max] | 7.26 |
| Relief valve | None |
| Rotational speed at 50Hz [rpm] | 2900 |
| Rotational speed at 60Hz [rpm] | 3500 |
| Shipped instructions | Installation instructions |
| Shipped mounting | Mounting kit with grommets and sleeves |
| Shipped oil | Initial oil charge |
| Speed Platform | Fixed-speed |
| Suction connection pipe size [in] | 1 1/8 |
| Suction connection size [in] | 1 1/8 |
| Swept volume [cm3] | 162.4 |
| Technique | Scroll |
| Torque earth [Nm] | 2 |
| Torque power [Nm] | 3 |
| Type designation | Compressor |
| Viscosity [cP] | 68 |
| Winding resistance 1-2 [Ohm] | 1.13 |
| Winding resistance 1-3 [Ohm] | 1.11 |
| Winding resistance 2-3 [Ohm] | 1.1 |
| • Acoustic hood 1 | 120Z5045 |
| • Acoustic hood 1 Description | Acoustic hood |
| • Belt 01 | 120Z0059 |
| • Belt 01 Description | Belt type crankcase heater, 65 W, 230 V, CE mark, UL |
| • Belt 02 | 120Z0060 |
| • Belt 02 Description | Belt type crankcase heater, 65 W, 400 V, CE mark, UL |
| • Belt 03 | 120Z5040 |
| • Belt 03 Description | Belt type crankcase heater, 70 W, 240 V, CE mark, UL |
| • Discharge gasket | 8156132 |
| • Discharge gasket Description | Gasket, 1-3/4" |
| • Discharge temperature protection | 7750009 |
| • Discharge temperature protection Description | Discharge thermostat kit |
| • Discharge valve | 8168030 |
| • Discharge valve Description | Rotolock valve, V05 (1-1/4" rotolock, 7/8" ODF) |
| • Gasket set | 8156009 |
| • Gasket set Description | Gasket set, 1", 1-1/4", 1-3/4", OSG gaskets black and white |
| • Mounting kit 1 | 120Z5005 |
| • Mounting kit 1 Description | Mounting kit for one-scroll compressor, including 4 grommets, 4 sleeves, 4 bolts, 4 washers |
| • Mounting kit 2 | 120Z5031 |
| • Mounting kit 2 Description | Mounting kit, including 1 bolt, 1 sleeve, 1 washer |
| • Oil 1 | 120Z5034 |
| • Oil 1 Description | PVE lubricant, 320HV (FVC68D), 1-litre can |
| • Solder sleeve set | 120Z0125 |
| • Solder sleeve set Description | Solder sleeve adaptor set (1-3/4" rotolock, 1-1/8" ODF), (1-1/4" rotolock, 7/8" ODF) |
| • Suction angle | 8168005 |
| • Suction angle Description | Angle adaptor, C02 (1-3/4" rotolock, 1-1/8" ODF) |
| • Suction gasket | 8156132 |
| • Suction gasket Description | Gasket, 1-3/4" |
| • Suction sleeve | 8153004 |
| • Suction sleeve Description | Solder sleeve, P02 (1-3/4" rotolock, 1-1/8" ODF) |
| • Suction valve | 8168028 |
| • Suction valve Description | Rotolock valve, V02 (1-3/4" rotolock, 1-1/8" ODF) |
| • Valve set | 120Z0403 |
| • Valve set Description | Valve set, V02(1”3/4~1”1/8), V05(1”1/4~7/8”) |
Напишите ваш собственный отзыв