Товар добавлен в корзину
SM370-4 COMP PERFORMER TANDEM
По запросу
SKU
r_danfoss_SM370-4
SM370-4
Цены со скидкой действуют при заказе от 7000 руб
Минимальная сумма заказа составляет 4000 руб
Characteristic |
Value |
| Type | SM |
| Net weight | 240.00 Kg |
| Approval standards | Individual compressors CE certified; Individual compressors UL certified (file SA6873) |
| Brand technique | Tandem scroll compressor |
| Composition | 2 x SM185S4RC |
| Configuration code | Tandem |
| Connection type | Brazed |
| Discharge connection pipe size [in] | 1 3/8 |
| Discharge connection size [in] | 1 3/8 |
| Drawing number | 8551018e |
| Factory HP [bar] | 33 |
| Factory LP [bar] | 25 |
| Fitting standard | ODF |
| Frequency [Hz] | 50/60 |
| GP LP torque [Nm] | 15 |
| Gauge port HP | Schrader |
| Gauge port LP | Schrader |
| Generation code | no |
| Glass mounting | Threaded |
| Glass torque [Nm] | 50 |
| Gross weight | 265.00 Kg |
| High value of nominal voltage at 50Hz [V] | 415 |
| High value of nominal voltage at 60Hz [V] | 460 |
| High value of voltage range at 50Hz [V] | 457 |
| High value of voltage range at 60Hz [V] | 506 |
| IP protection class | IP54 (with cable gland) |
| LRA | 175 + 175 A |
| Low value of nominal voltage at 50Hz [V] | 380 |
| Low value of nominal voltage at 60Hz [V] | 460 |
| Low value of voltage range at 50Hz [V] | 342 |
| Low value of voltage range at 60Hz [V] | 414 |
| MMT | 35 + 35 A |
| Model number | SM370-4 |
| Motor protection | Internal thermostat, ext. overload protector needed |
| Mounting torque [Nm] | 0 |
| Nominal cooling capacity at 50Hz | 81 |
| Nominal cooling capacity at 60Hz | 107.1 |
| Number of starts per hour [Max] | 12 |
| Oil charge [cm3] | 12.4 |
| Oil drain | 1/4'' NPT |
| Oil drain torque [Nm] | 35 |
| Oil equalization | Interconnected |
| Oil equalization torque [Nm] | 48 |
| Oil reference | 160P |
| Packaging weight [Kg] | 225 |
| Packing format | Single pack |
| Packing quantity | 1 |
| Phase | 3 |
| Power connections | Screw 4.8 mm |
| Refrigerant | R22; R417A-160SZ |
| Refrigerant charge [kg] [Max] | 17.5 |
| Relief valve | None |
| Rotational speed at 50Hz [rpm] | 2900 |
| Rotational speed at 60Hz [rpm] | 3500 |
| Shipped instructions | Installation instructions |
| Shipped oil | Initial oil charge |
| Speed Platform | Fixed-speed |
| Suction connection pipe size [in] | 2 1/8 |
| Suction connection size [in] | 2 1/8 |
| Swept volume [cm3] | 499.8 |
| Technique | Scroll |
| Test HP [bar] [Max] | 32 |
| Test LP [bar] [Max] | 25 |
| Test dif [bar] [Max] | 24 |
| Torque Ebox cover [Nm] | 2 |
| Torque earth [Nm] | 2 |
| Torque power [Nm] | 3 |
| Type designation | Compressor |
| Viscosity [cP] | 32 |
| Winding resistance for three-phase compressors with identical windings [Ohm] | 0.77 + 0.77 Ohm |
| • Acoustic hood 1 | 7755007 |
| • Acoustic hood 1 Description | Acoustic hood for scroll compressor S175-S185 |
| • Acoustic hood 2 | 120Z0353 |
| • Acoustic hood 2 Description | Acoustic bottom insulation for scroll compressor |
| • Belt 01 | 120Z0360 |
| • Belt 01 Description | Surface sump heater + bottom insulation, 56 W, 24 V, CE mark, UL |
| • Belt 02 | 120Z0376 |
| • Belt 02 Description | Surface sump heater + bottom insulation, 56 W, 230 V, CE mark, UL |
| • Belt 03 | 120Z0377 |
| • Belt 03 Description | Surface sump heater + bottom insulation, 56 W, 400 V, CE mark, UL |
| • Belt 04 | 120Z0378 |
| • Belt 04 Description | Surface sump heater + bottom insulation, 56 W, 460 V, CE mark, UL |
| • Belt 07 | 7773108 |
| • Belt 07 Description | Belt type crankcase heater, 75 W, 230 V, CE mark, UL |
| • Belt 08 | 7773118 |
| • Belt 08 Description | Belt type crankcase heater, 75 W, 400 V, CE mark, UL |
| • Belt 09 | 120Z0464 |
| • Belt 09 Description | Belt type crankcase heater, 75 W, 460 V, CE mark, UL |
| • Discharge temperature protection | 7750009 |
| • Discharge temperature protection Description | Discharge thermostat kit |
| • Ebox | 8156139 |
| • Ebox Description | Terminal box 186 x 198 mm, including cover |
| • Mounting kit 1 | 8156138 |
| • Mounting kit 1 Description | Mounting kit for one-scroll compressor, including 4 grommets, 4 sleeves, 4 bolts, 4 washers |
| • Mounting kit 2 | 8156003 |
| • Mounting kit 2 Description | Mounting kit for one-scroll tandem, including 4 rubber grommets |
| • Oil 1 | 7754001 |
| • Oil 1 Description | Mineral oil, 160P, 2-litre can |
| • Oil sight glass | 8156019 |
| • Oil sight glass Description | Oil sight glass with gaskets (black and white) |
| • Oil sight glass gasket | 8156129 |
| • Oil sight glass gasket Description | Gasket for oil sight glass (white teflon) |
| • Restrictor | 7765013 |
| • Restrictor Description | Suction header restrictor for SM/SZ320-350-370 |
| • Starting device 1 | 7705007 |
| • Starting device 1 Description | Electronic soft start kit, MCI 25 C |
| • T block | 8173021 |
| • T block Description | T block connector 60 x 75 mm |
| • Tandem | 7703371 |
| • Tandem Description | Restrictor + suction/discharge tees for SM/SZ350-370 |
Напишите ваш собственный отзыв
