Товар добавлен в корзину
003L1015 FHV-R Клапан Ду 20мм Danfoss Следующий
003L1002 Danfoss Предыдущий
088U0090 Danfoss
По запросу
SKU
h_danfoss_088U0090
The prefabricated FHM-C - Mixing Shunts
The prefabricated Danfoss floor heating mixing shunts are used for regulating the correct flow and supply temperature in hydronic floor heating systems.
The compact design and flexibility allows mounting the mixing shunt directly to the manifold, both on left and right side and primary pipe connection to the shunt from the side or below. A self-acting proportional regulator is used to regulate the supply temperature. The regulator ensures the correct mix so that the desired supply temperature to the underfloor heating system always remains constant. A possible safety thermostat protects the floor against too high temperatures and the electronic variable speed pump is adjusting itself for correct flow in the circuits. A standard 3-speed pump is also available. The built-in check valve ensures correct flow direction. An air-vent on top and a thermometer in supply completes the mixing shunt.
Danfoss floor heating mixing shunts are used for regulating the correct flow and supply temperature in hydronic floor heating systems.
Цены со скидкой действуют при заказе от 7000 руб
Минимальная сумма заказа составляет 4000 руб
Characteristic |
Value |
Type | Compact Mixing Shunts |
CodeNumber | 088U0090 |
Type | FHM-ABV/ECL 110 |
Напишите ваш собственный отзыв