Товар добавлен в корзину
120U1596 HRP058T5LP6 COMPRESSOR, M-PAK, MTG Следующий
120U1628 Предыдущий
120U1603 HRP060T5LP6 Компрессор спиральный Danfoss
По запросу
SKU
r_danfoss_120U1603
HRP060T5
Цены со скидкой действуют при заказе от 7000 руб
Минимальная сумма заказа составляет 4000 руб
Characteristic |
Value |
| Type | HRP |
| Net weight | 40.83 Kg |
| Approval standards | CE certified; UL certified (file SA11565) |
| Auxiliary winding resistance (start winding) for single-phase compressors [Ohm] | 1.02 |
| Brand technique | Scroll compressor |
| Capacity of capacitor A | 55 |
| Capacity of capacitor B | 88-108 µF |
| Configuration code | Single |
| Connection type | Brazed |
| Discharge connection pipe size [in] | 1/2 |
| Discharge connection size [in] | 1/2 |
| Drawing number | 0XR6002B-2 |
| EAN | 5702428225151 |
| Fitting standard | ODF |
| Frequency [Hz] | 50 |
| Gauge port HP | None |
| Gauge port LP | None |
| Glass mounting | None |
| Gross weight | 43.50 Kg |
| High value of nominal voltage at 50Hz [V] | 230 |
| High value of voltage range at 50Hz [V] | 253 |
| IP protection class | IP22 |
| LRA | 130 A |
| Low value of nominal voltage at 50Hz [V] | 230 |
| Low value of voltage range at 50Hz [V] | 207 |
| MCC | 40 A |
| Main winding resistance for single-phase compressors [Ohm] | 0.39 |
| Model number | HRP060T5LP6 |
| Motor protection | Internal overload protector |
| Nominal cooling capacity at 50Hz | 12.6 |
| Nominal heating capacity at 50Hz | 8 |
| Oil charge [cm3] | 1.57 |
| Oil equalization | None |
| Packing format | Industrial pack |
| Phase | 1 |
| Power connections | Spade |
| RLA | 25.6 A |
| Refrigerant | R407C |
| Refrigerant charge [kg] [Max] | 5.44 |
| Relay model | 3ARR3*25AS* |
| Relief valve | Yes |
| Rotational speed at 50Hz [rpm] | 2900 |
| Shipped instructions | Installation instructions |
| Shipped mounting | Mounting kit with grommets and sleeves |
| Shipped oil | Initial oil charge |
| Speed Platform | Fixed-speed |
| Suction connection pipe size [in] | 7/8 |
| Suction connection size [in] | 7/8 |
| Swept volume [cm3] | 80.95 |
| Technique | Scroll |
| Type designation | Compressor |
| Viscosity [cP] | 68 |
| Voltage of capacitor A [V] | 440 |
| Voltage of capacitor B [V] | 330 |
| • Acoustic hood 1 | 120Z5044 |
| • Acoustic hood 1 Description | Acoustic hood |
| • Belt 01 | 120Z0057 |
| • Belt 01 Description | Belt type crankcase heater, 50 W, 230 V, CE mark, UL |
| • Capacitor A | 8173234 |
| • Capacitor A Description | Run capacitor 440V,55 µF |
| • Capacitor B | 8173001 |
| • Capacitor B Description | Start capacitor 330V, 98 µF |
| • Discharge angle | 8168007 |
| • Discharge angle Description | Angle adaptor, C06 (1" rotolock, 1/2" ODF) |
| • Discharge gasket | 8156130 |
| • Discharge gasket Description | Gasket, 1" |
| • Discharge sleeve | 8153007 |
| • Discharge sleeve Description | Solder sleeve, P06 (1" rotolock, 1/2" ODF) |
| • Discharge temperature protection | 7750009 |
| • Discharge temperature protection Description | Discharge thermostat kit |
| • Discharge valve | 8168031 |
| • Discharge valve Description | Rotolock valve, V06 (1" rotolock, 1/2" ODF) |
| • Gasket set | 8156009 |
| • Gasket set Description | Gasket set, 1", 1-1/4", 1-3/4", OSG gaskets black and white |
| • Mounting kit 1 | 120Z5005 |
| • Mounting kit 1 Description | Mounting kit for one-scroll compressor, including 4 grommets, 4 sleeves, 4 bolts, 4 washers |
| • Mounting kit 2 | 120Z5031 |
| • Mounting kit 2 Description | Mounting kit, including 1 bolt, 1 sleeve, 1 washer |
| • Oil 1 | 120Z5034 |
| • Oil 1 Description | PVE lubricant, 320HV (FVC68D), 1-litre can |
| • Solder sleeve set | 120Z0127 |
| • Solder sleeve set Description | Solder sleeve adaptor set (1-1/4" rotolock, 7/8" ODF), (1" rotolock, 1/2" ODF) |
| • Suction gasket | 8156131 |
| • Suction gasket Description | Gasket, 1-1/4" |
| • Suction valve | 8168030 |
| • Suction valve Description | Rotolock valve, V05 (1-1/4" rotolock, 7/8" ODF) |
Напишите ваш собственный отзыв