Товар добавлен в корзину
120U1603 HRP060T5LP6 Компрессор спиральный Danfoss Следующий
SZ125-6CAI Предыдущий
120U1628
По запросу
SKU
r_danfoss_120U1628
HLP072T5
Цены со скидкой действуют при заказе от 7000 руб
Минимальная сумма заказа составляет 4000 руб
Characteristic |
Value |
Type | HLP |
Net weight | 41.00 Kg |
Approval standards | CE certified; UL certified (file SA11565) |
Auxiliary winding resistance (start winding) for single-phase compressors [Ohm] | 1.02 |
Brand technique | Scroll compressor |
Capacity of capacitor A | 55 |
Capacity of capacitor B | 88-108 µF |
Configuration code | Single |
Connection type | Brazed |
Discharge connection pipe size [in] | 1/2 |
Discharge connection size [in] | 1/2 |
Drawing number | 0XR6002B-2 |
EAN | 5702428224956 |
Fitting standard | ODF |
Frequency [Hz] | 50 |
Gauge port HP | None |
Gauge port LP | None |
Glass mounting | None |
Gross weight | 43.67 Kg |
High value of nominal voltage at 50Hz [V] | 230 |
High value of voltage range at 50Hz [V] | 253 |
IP protection class | IP22 |
LRA | 130 A |
Low value of nominal voltage at 50Hz [V] | 230 |
Low value of voltage range at 50Hz [V] | 207 |
MCC | 40 A |
Main winding resistance for single-phase compressors [Ohm] | 0.39 |
Model number | HLP072T5LP6 |
Motor protection | Internal overload protector |
Nominal cooling capacity at 50Hz | 15 |
Nominal heating capacity at 50Hz | 9.6 |
Oil charge [cm3] | 1.57 |
Oil equalization | None |
Packing format | Industrial pack |
Phase | 1 |
Power connections | Spade |
RLA | 25.6 A |
Refrigerant | R407C |
Refrigerant charge [kg] [Max] | 5.44 |
Relay model | 3ARR3*25AS* |
Relief valve | Yes |
Rotational speed at 50Hz [rpm] | 2900 |
Shipped instructions | Installation instructions |
Shipped mounting | Mounting kit with grommets and sleeves |
Shipped oil | Initial oil charge |
Speed Platform | Fixed-speed |
Suction connection pipe size [in] | 7/8 |
Suction connection size [in] | 7/8 |
Swept volume [cm3] | 98.65 |
Technique | Scroll |
Type designation | Compressor |
Viscosity [cP] | 68 |
Voltage of capacitor A [V] | 440 |
Voltage of capacitor B [V] | 330 |
• Acoustic hood 1 | 120Z5044 |
• Acoustic hood 1 Description | Acoustic hood |
• Belt 01 | 120Z0057 |
• Belt 01 Description | Belt type crankcase heater, 50 W, 230 V, CE mark, UL |
• Capacitor A | 8173234 |
• Capacitor A Description | Run capacitor 440V,55 µF |
• Capacitor B | 8173001 |
• Capacitor B Description | Start capacitor 330V, 98 µF |
• Discharge angle | 8168007 |
• Discharge angle Description | Angle adaptor, C06 (1" rotolock, 1/2" ODF) |
• Discharge gasket | 8156130 |
• Discharge gasket Description | Gasket, 1" |
• Discharge sleeve | 8153007 |
• Discharge sleeve Description | Solder sleeve, P06 (1" rotolock, 1/2" ODF) |
• Discharge temperature protection | 7750009 |
• Discharge temperature protection Description | Discharge thermostat kit |
• Discharge valve | 8168031 |
• Discharge valve Description | Rotolock valve, V06 (1" rotolock, 1/2" ODF) |
• Gasket set | 8156009 |
• Gasket set Description | Gasket set, 1", 1-1/4", 1-3/4", OSG gaskets black and white |
• Mounting kit 1 | 120Z5005 |
• Mounting kit 1 Description | Mounting kit for one-scroll compressor, including 4 grommets, 4 sleeves, 4 bolts, 4 washers |
• Mounting kit 2 | 120Z5031 |
• Mounting kit 2 Description | Mounting kit, including 1 bolt, 1 sleeve, 1 washer |
• Oil 1 | 120Z5034 |
• Oil 1 Description | PVE lubricant, 320HV (FVC68D), 1-litre can |
• Solder sleeve set | 120Z0127 |
• Solder sleeve set Description | Solder sleeve adaptor set (1-1/4" rotolock, 7/8" ODF), (1" rotolock, 1/2" ODF) |
• Suction gasket | 8156131 |
• Suction gasket Description | Gasket, 1-1/4" |
• Suction valve | 8168030 |
• Suction valve Description | Rotolock valve, V05 (1-1/4" rotolock, 7/8" ODF) |
Напишите ваш собственный отзыв