121U3114 Предыдущий 121U3114
Danfoss

120U2555

По запросу
SKU
r_danfoss_120U2555
HCJ120T4
   Цены со скидкой действуют при заказе от 7000 руб
   Минимальная сумма заказа составляет 4000 руб

Characteristic

Value

Type HCJ
Net weight 45.17 Kg
Approval standards CE certified; UL certified (file SA11565)
Brand technique Scroll compressor
Configuration code Single
Connection type Brazed
Discharge connection pipe size [in] 7/8
Discharge connection size [in] 7/8
Drawing number 0SR7509B
EAN 5702428218061
Fitting standard ODF
Frequency [Hz] 50/60
Gauge port HP None
Gauge port LP None
Glass mounting Threaded
Glass torque [Nm] 53
Gross weight 47.83 Kg
High value of nominal voltage at 50Hz [V] 415
High value of nominal voltage at 60Hz [V] 460
High value of voltage range at 50Hz [V] 457
High value of voltage range at 60Hz [V] 506
IP protection class IP22
LRA 140 A
Low value of nominal voltage at 50Hz [V] 380
Low value of nominal voltage at 60Hz [V] 460
Low value of voltage range at 50Hz [V] 342
Low value of voltage range at 60Hz [V] 414
MCC 27 A
Model number HCJ120T4LC7
Motor protection Internal overload protector
Nominal cooling capacity at 50Hz 26.3
Nominal cooling capacity at 60Hz 35.6
Nominal heating capacity at 50Hz 17.6
Oil charge [cm3] 2.66
Oil equalization None
Packing format Industrial pack
Phase 3
Power connections Screw connectors 10-32 UNF x 9.5
RLA 19.2 A
Refrigerant R410A
Refrigerant charge [kg] [Max] 7.26
Relief valve None
Rotational speed at 50Hz [rpm] 2900
Rotational speed at 60Hz [rpm] 3500
Shipped instructions Installation instructions
Shipped mounting Mounting kit with grommets and sleeves
Shipped oil Initial oil charge
Speed Platform Fixed-speed
Suction connection pipe size [in] 1 1/8
Suction connection size [in] 1 1/8
Swept volume [cm3] 113.07
Technique Scroll
Torque earth [Nm] 2
Torque power [Nm] 3
Type designation Compressor
Viscosity [cP] 68
Winding resistance 1-2 [Ohm] 1.13
Winding resistance 1-3 [Ohm] 1.11
Winding resistance 2-3 [Ohm] 1.1
• Acoustic hood 1 120Z5045
• Acoustic hood 1 Description Acoustic hood
• Belt 01 120Z0059
• Belt 01 Description Belt type crankcase heater, 65 W, 230 V, CE mark, UL
• Belt 02 120Z0060
• Belt 02 Description Belt type crankcase heater, 65 W, 400 V, CE mark, UL
• Belt 03 120Z5040
• Belt 03 Description Belt type crankcase heater, 70 W, 240 V, CE mark, UL
• Discharge gasket 8156132
• Discharge gasket Description Gasket, 1-3/4"
• Discharge temperature protection 7750009
• Discharge temperature protection Description Discharge thermostat kit
• Discharge valve 8168030
• Discharge valve Description Rotolock valve, V05 (1-1/4" rotolock, 7/8" ODF)
• Gasket set 8156009
• Gasket set Description Gasket set, 1", 1-1/4", 1-3/4", OSG gaskets black and white
• Mounting kit 1 120Z5005
• Mounting kit 1 Description Mounting kit for one-scroll compressor, including 4 grommets, 4 sleeves, 4 bolts, 4 washers
• Mounting kit 2 120Z5031
• Mounting kit 2 Description Mounting kit, including 1 bolt, 1 sleeve, 1 washer
• Oil 1 120Z5034
• Oil 1 Description PVE lubricant, 320HV (FVC68D), 1-litre can
• Solder sleeve set 120Z0125
• Solder sleeve set Description Solder sleeve adaptor set (1-3/4" rotolock, 1-1/8" ODF), (1-1/4" rotolock, 7/8" ODF)
• Suction angle 8168005
• Suction angle Description Angle adaptor, C02 (1-3/4" rotolock, 1-1/8" ODF)
• Suction gasket 8156132
• Suction gasket Description Gasket, 1-3/4"
• Suction sleeve 8153004
• Suction sleeve Description Solder sleeve, P02 (1-3/4" rotolock, 1-1/8" ODF)
• Suction valve 8168028
• Suction valve Description Rotolock valve, V02 (1-3/4" rotolock, 1-1/8" ODF)
• Valve set 120Z0403
• Valve set Description Valve set, V02(1”3/4~1”1/8), V05(1”1/4~7/8”)
Напишите ваш собственный отзыв
Написать отзыв120U2555